Impregnation of Wood with Waste Engine Oil to Increase Water- and Bio-Resistance

Abstract

Impregnation is a common method of protecting wood from external influences. This study proposes the use of spent engine oil as an impregnating composition for modifying birch wood to make it resistant to biological degradation and water. The indicators of water resistance and dimensional stability of wood such as wetting contact angle, thermogravimetric analysis, Fourier transform infrared spectroscopy (FTIR), and biodegradation tests have been determined. It has been found that treatment with spent engine oil significantly increases the dimensional stability (56.8% and 45.7% in tangential and radial directions) and water-resistant indicators of wood. Thermogravimetric analysis has showed that the curves for the impregnated specimens were different from the control group and had two sharp peaks at 302 and 357 °C. However, FTIR indicated that no clear chemical reactions occur between spent engine oil and wood. A study on wood resistance to biological degradation has showed a significant increase in resistance against brown rot (Poria placenta fungi) in the treated specimens, in contrast to the control group. Thus, impregnation of wood with spent engine oil makes it possible to increase wood resistance to water and biological degradation.