Investigating the Impact of Substrate Preheating on the Thermal Flow and Microstructure of Laser Cladding of Nickel-Based Superalloy

Abstract

The preheating of the substrate in laser additive superalloys can reduce residual stress and minimize cracking. However, this preheating process can lead to changes in the heat transfer conditions, ultimately affecting the resulting microstructure and mechanical properties. In order to explore the influence of substrate preheating on the formation of laser cladding, this research focuses on investigating the characteristics of Inconel 718, a nickel-based superalloy, as the subject of study. To simulate the temperature and flow field of laser cladding, a 3D computational fluid dynamics (CFD) model is employed. By varying the initial preheating conditions, an investigation is conducted into the distribution of the temperature field under different parameters. This leads to the acquisition of varying temperature gradients, G, and solidification speeds, R. Subsequently, an analysis is carried out on both the flow field and solidification microstructure in the melt pool. The results demonstrate that the preheating of the substrate results in a slower cooling rate, ultimately leading to the formation of a coarser microstructure.