Affiliation:
1. Electronics Engineering Department, Universitat Politècnica de Catalunya, 08222 Terrassa, Spain
2. Electrical Engineering Department, Universitat Politècnica de Catalunya, 08222 Terrassa, Spain
Abstract
Lithium-ion batteries are key elements in the development of electrical energy storage solutions. However, due to cycling, environmental, and operating conditions, battery capacity tends to degrade over time. Capacity fade is a common indicator of battery state of health (SOH) because it is an indication of how the capacity has been degraded. However, battery capacity cannot be measured directly, and thus, there is an urgent need to develop methods for estimating battery capacity in real time. By analyzing the historical data of a battery in detail, it is possible to predict the future state of a battery and forecast its remaining useful life. This study developed a real-time, simple, and fast method to estimate the cycle capacity of a battery during the charge cycle using only data from a short period of each charge cycle. This proposal is attractive because it does not require data from the entire charge period since batteries are rarely charged from zero to full. The proposed method allows for simultaneous and accurate real-time prediction of the health and remaining useful life of the battery over its lifetime. The accuracy of the proposed method was tested using experimental data from several lithium-ion batteries with different cathode chemistries under various test conditions.
Funder
Ministerio de Ciencia e Innovación de España
Generalitat de Catalunya
Subject
Electrical and Electronic Engineering,Electrochemistry,Energy Engineering and Power Technology
Reference43 articles.
1. The discovery of cathode materials for lithium-ion batteries from the view of interdisciplinarity;Huang;Interdiscip. Mater.,2022
2. Spitthoff, L., Øyre, E.S., Muri, H.I., Wahl, M., Gunnarshaug, A.F., Pollet, B.G., Lamb, J.J., and Burheim, O.S. (2020). Micro-Optics and Energy: Sensors for Energy Devices, Springer.
3. An Overview and Comparison of Online Implementable SOC Estimation Methods for Lithium-Ion Battery;Meng;IEEE Trans. Ind. Appl.,2018
4. Lithium polymer battery state-of-charge estimation based on adaptive unscented kalman filter and support vector machine;Meng;IEEE Trans. Power Electron.,2016
5. A conformal heat-drying direct ink writing 3D printing for high-performance lithium-ion batteries;Tao;Mater. Today Chem.,2023