Fabrications of L-Band LiNbO3-Based SAW Resonators for Aerospace Applications

Abstract

High frequency surface acoustic wave (SAW) technology offers many opportunities for aerospace applications in passive wireless sensing and communication. This paper presents the design, simulation, fabrication, and test of an L-band SAW resonator based on 128° Y-X LiNbO3 substrate. The design parameters of SAW resonator were optimized by the finite element (FEM) method and the coupling-of-mode (COM) theory. Electron-beam lithography (EBL) technology was used to fabricate the submicron-scale of interdigital transducers (IDTs) and grating reflectors. The effects of some key EBL processes (e.g., the use of electron beam resist, the choice of metal deposition methods, the charge-accumulation effect, and the proximity-effect) on the fabrication precision of SAW devices were discussed. Experimentally, the LiNbO3-based SAW resonators fabricated using improved EBL technology exhibits a Rayleigh wave resonance peaks at 1.55 GHz with return loss about −12 dB, and quality factor Q is 517. Based on this SAW resonator, the temperature and strain sensing tests were performed, respectively. The experimental results exhibit a well linear dependence of temperature/strain on frequency-shift, with a temperature sensitivity of 125.4 kHz/°C and a strain sensitivity of −831 Hz/με, respectively.