Abstract
The separation dynamics of a multiphase fluid mixture is studied with the aim to validate the gas reduction from the mixture by means of a KMS helical static mixer device through a laboratory prototype based on the jet-pump artificial lift system for oil extraction. The study is focused on the cyclone phenomenon, produced by the KMS, to experimentally verify the reduction of foaming in a reservoir behaving as a horizontal gravity separator of an oil–gas–water mixture under specific dynamics conditions of velocity and pressure of an incoming streamline, as well as some physical mounting configurations of the device. The results were numerical and experimentally validated, projecting the real performance in three-phase separators in an oil extraction field to improve efficiency in pumping machines regarding the negative effects of the gas. Concerning the gas reduction, a KMS of two elements located at 100 mm from the entrance of the horizontal reservoir and 20 mm from a gas casing tube successfully improves the gas isolation from the mixture, from 29.2% to practically 0% over 200 min in the reservoir, to let oil and water become separated by sedimentation. This gas reduction is indirectly assessed by the emulsion that is generated, which affects the time of oil separation in the counterbalance.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference23 articles.
1. Artificial Lift Selection Methodology for Vertical and Horizontal Wells in Conventional and Unconventional Reservoirs;Nguyen,2020
2. Petroleum Production Engineering. A Computed Assisted Approach;Guo,2007
3. A novel centrifugal gas liquid pipe separator for high velocity wet gas separation
4. Handbook of Separation Process Technology;Rousseau,1987
5. Industrial Separation Processes. Fundamentals;Haan,2020