Numerical Analysis of the Beam-Column Resistance Compared to Methods by European Standards

Abstract

The optimisation of the design method for verification of slender steel beam-columns is still a current issue not only from scientific point of view, but also for design practice. Therefore, the main objective of this paper is comparison of the suitability of established design approaches, according to the European standards for steel and aluminium structures, on the basis of numerical simulations. Thus, a finite element model was validated on the basis of experimental analysis available in the scientific literature. To perform the comparison of accuracy of design approaches according to European standards, a commercial software program ANSYS was used for observation of the resistances of beam-columns. The resistance of european I beams with parallel flanges (IPE) and a rectangular hollow cross-section (RHS) were investigated for four load cases on a simply supported member and also on a pinned-fixed beam column with linear bending moment distribution, where the resistance of the cross-section governs. Finally, the conclusions for suitability of the respective design approaches are discussed, together with some findings that arose from this work.