Upcycling of Poly(Lactic Acid) by Reactive Extrusion with Recycled Polycarbonate: Morphological and Mechanical Properties of Blends

Abstract

Poly(lactic acid) (PLA) is one of the most promising renewable polymers to be employed to foster ecological and renewable materials in many fields of application. To develop high-performance products, however, the thermal resistance and the impact properties should be improved. At the same time, it is also necessary to consider the end of life through the exploration of property assessment, following reprocessing. In this context the aim of the paper is to develop PLA/PC blends, obtained from recycled materials, in particular scraps from secondary processing, to close the recycling loop. Indeed, the blending of PLA with polycarbonate (PC) was demonstrated to be a successful strategy to improve thermomechanical properties that happens after several work cycles. The correlation between the compositions and properties was then investigated by considering the morphology of the blends; in addition, the reactive extrusions resulting in the formation of a PLA-PC co-polymer were investigated. The materials obtained are then examined by means of a dynamic-mechanical analysis (DMTA) to study the relaxations and transitions.