Abstract
The mechanical properties of HTPE binders have been systemically studied through combining the microstructure molecular simulations with macroscopic experiments. In this study, the crosslinking structures of HTPE binders were established by a computational procedure. Based on the optimized crosslinking models, the mechanical properties and the glass transition temperatures (Tg) of HTPE/N-100, HTPE/HDI, HTPE/TDI, and HTPE/IPDI binder systems were simulated; specifically, the Tg were 245.758 K, 244.573 K, 254.877 K, and 240.588 K, respectively. Then the bond-length distributions, conformation properties, cohesive energy densities, and fraction free volume were investigated to analyze how the microstructures of the crosslinking models influenced the mechanical properties of HTPE binders. Simultaneously, FTIR-ATR spectra analysis of HTPE binders proved that the special peaks, such as -NH and -NCO, could be seen in the crosslinking polyurethane structures synthesized between prepolymers and curing agents. The dynamic mechanical analysis was carried out, and it found that the Tg of HTPE/N-100, HTPE/HDI, HTPE/TDI, and HTPE/IPDI binder systems were −68.18 °C, −68.63 °C, −65.67 °C, and −68.66 °C, respectively. In addition, the uniaxial tension verified that both the ultimate stress and Young’s modulus of HTPE binder systems declined with the rising temperatures, while the strains at break presented a fluctuant variation. When it was closer to glass temperatures, especially −40 °C, the mechanical properties of HTPE binders were more prominent. The morphology of the fractured surface revealed that the failure modes of HTPE binders were mainly intermolecular slipping and molecular chain breakage. In a word, the experimental results were prospectively satisfied using the simulations, which confirmed the accuracy of the crosslinking models between prepolymers and curing agents. This study could provide a scientific option for the HTPE binder systems and guide the design of polyurethanes for composite solid propellant applications.
Funder
National Natural Science Foundation of China
Subject
Polymers and Plastics,General Chemistry
Reference52 articles.
1. Varghese, T., and Krishnamurthy, V. (2017). The Chemistry and Technology of Solid Rocket Propellant, Allied Publishers.
2. Hartman, K. (1999, January 19–23). Insensitive munitions technology for small rocket motors. Proceedings of the Small Rockets Motors and Gas Generator for Land, Sea and Air Launched Weapons, RTO Meeting Proceedings, Corfu, Greece.
3. Fossumstuen, K., Tokerud, D., Biserod, H., Orbekk, E., Tenden, S., Kaiserman, M., Rodack, M., Spate, W., Winetrobe, S., and Royce, B. (2005, January 10–13). The hypervelocity anti-tank missile development program; Rocket motor design and development. Proceedings of the 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Tucson, AZ, USA.
4. Bullet Impact and Fast cookoff characteristics of HTPE Insensitive Solid Propellant;Xi;Chin. J. Explos. Propellants,2019
5. Structure-property relationships of hydroxy-terminated polyether based polyurethane network;Kim;Polym. Bull.,2008