Abstract
Three Ni-based natural gas steam reforming catalysts, i.e., commercial JM25-4Q and JM57-4Q, and a laboratory-made catalyst (26% Ni on a 5% SiO2–95% Al2O3), are tested in a laboratory reactor, under carbon dioxide methanation and methane steam reforming operating conditions. The laboratory catalyst is more active in both CO2 methanation (equilibrium is reached at 623 K with 100% selectivity) and methane steam reforming (92% hydrogen yield at 890 K) than the two commercial catalysts, likely due to its higher nickel loading. In any case, commercial steam reforming catalysts also show interesting activity in CO2 methanation, reduced by K-doping. The interpretation of the experimental results is supported by a one-dimensional (1D) pseudo-homogeneous packed-bed reactor model, embedding the Xu and Froment local kinetics, with appropriate kinetic parameters for each catalyst. In particular, the H2O adsorption coefficient adopted for the commercial catalysts is about two orders of magnitude higher than for the laboratory-made catalyst, and this is in line with the expectations, considering that the commercial catalysts have Ca and K added, which may promote water adsorption.
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous)
Cited by
24 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献