Effect of Shelterwood and Clear-Cutting Regeneration Method on Wood Density of Scots Pine

Abstract

With the gradual decline in the proportion of spruce as the most important tree species in the Czech Republic, the importance of pine will increase. The test material for this study was selected from two localities with important representation of pure Scots pine stands. Two stands, representing clear-cutting and shelterwood regeneration methods were selected from each locality. In the case of shelterwood method, tree samples from a lower layer were cut down and subsequently evaluated in terms of the impact of the regeneration method on the density of the wood, the density of earlywood and latewood, the proportion of latewood and the width of the annual rings. These qualitative parameters of the wood were compared before and after the release of the parent stand canopy. The clear-cutting regeneration method served as a reference. The values obtained before the release of the parent stand canopy are significantly different from values after its removal (share of latewood 47.7% and 48.1% before the release in contrast to 39.5% and 39.1% after the release for the locality 1 and the locality 2 respectively). The shelterwood regeneration method has not a significant impact on the overall investigated characteristics. Most significant was the impact of the regeneration method on the distribution of properties along the trunk radius, where the shelterwood method shows a uniform density distribution from the pith to the bark. From the view of industry, therefore, it is not important for the final processing which part of the trunk the wood comes from.