Abstract
Processing of pure chromium (Cr) encounters substantial challenges due to its high melting point and intrinsic brittleness. Although laser powder bed fusion processing (LPBF) offers a novel processing approach by reaching the temperature required to melt pure Cr, the high ductile-to-brittle transformation temperature (DBTT) of pure Cr prevents the density of the as-built Cr component from reaching the level of industrial acceptance. This study focuses on raising the quality of the as-built pure Cr components to the industrial level while considering the effect of scan length on densification and crystallographic texture. It was found that short scan length induced by feature size improved the density of as-built specimens while strengthening the texture suggesting uniform heat distribution and lower thermal gradients as a result of short time intervals in scanning tracks and layers. It was discovered that cracking caused by residual stress was detrimental to densification due to the DBTT characteristic of pure Cr, which was localized at high-angle grain boundaries (HAGBs) with high misorientation. The decrease in density and misorientation of HAGBs owing to the increase in grain size and texture strength, respectively, improved the density of as-built Cr up to 97.6% and altered its mechanical properties. Therefore, these findings offer new insight into the LPBF processing of metals with high DBTT characteristics.
Funder
Japan Society for the Promotion of Science
Japan Science and Technology Agency
Subject
Inorganic Chemistry,Condensed Matter Physics,General Materials Science,General Chemical Engineering
Cited by
20 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献