Affiliation:
1. ChenYang Technologies GmbH & Co. KG, Markt Schwabener Str. 8, 85464 Finsing, Germany
Abstract
This paper presents a novel low-speed measuring method using analog sine and square waves of Hall effect speed sensors coupled with correlative digital signal processing algorithms packaged on a signal processing unit. The frequency of the initial signal is estimated by a square wave period measuring method (SWPM). On the basis of the initially measured frequency, a recursive self-correction (RSC) algorithm is used to perform the low-frequency measurement using the discrete sinusoid wave. The low-speed signal frequency can be derived continuously from the phase difference of the discrete sine wave, where the RSC algorithm is used to achieve high measuring accuracy. Compared to the method using only the SWPM algorithm, this novel low-speed measuring method enables faster measuring speed to achieve sufficient real-time performance. Simulation analyses and experiments verified the effectiveness of the proposed low-speed measuring method.
Subject
General Agricultural and Biological Sciences
Reference22 articles.
1. Selected faults of low-speed machines, analysis of diagnostic signals;Golonka;MATEC Web Conf.,2021
2. Natili, F., Castellani, F., Astolfi, D., and Becchetti, M. (2020). Video-Tachometer Methodology for Wind Turbine Rotor Speed Measurement. Sensors, 20.
3. Permanent Magnet Vernier Machines for Direct-Drive Offshore Wind Power: Benefits and Challenges;Padinharu;IEEE Access,2022
4. A New Method for Angular Speed Measurement with Absolute Encoder;Akkaya;Elektronika ir Elektrotechnika,2020
5. Tomasini, E.P., and Castellini, P. (2020). Theory of Vibrometry, Springer. Laser Doppler Vibrometry P19-P53.