Viscosity Factor (VF) Complementary to the Statistical Indicators Associated with the Rheological Behavior of Aqueous Solutions of Polyvinyl Alcohol
Author:
Carrasco-Venegas Luis Américo1, González-Fernández José Vulfrano2ORCID, Castañeda-Pérez Luz Genara3, Palomino-Hernández Guido4, Dueñas-Dávila Federico Alexis56, Trujillo-Pérez Salvador Apolinar1
Affiliation:
1. Unidad de Posgrado, Facultad de Ingeniería Química, Universidad Nacional del Callao, Bellavista 07011, Peru 2. Instituto Tecnológico de San Luis Potosí, Tecnológico Nacional de México, San Luis Potosí 78436, Mexico 3. Facultad de Ciencias Naturales y Matemática, Red Internacional de I+D+i+e de la Escuela de Posgrado RIDIEP, Universidad Nacional Federico Villareal, Lima 15001, Peru 4. Facultad de Ingeniería Química y Metalurgia, Universidad Nacional de San Cristóbal de Huamanga, Ayacucho 05001, Peru 5. Facultad de Agronomía, Universidad Nacional Agraria la Molina, Lima 15024, Peru 6. Facultad de Ciencias e Ingeniería, PELCAN, Pontificia Universidad Católica del Perú, Lima 15088, Peru
Abstract
The rheological behavior of aqueous solutions of polyvinyl alcohol at 4, 6, 8 and 10% by weight has been studied and evaluated at temperatures of 20, 25, 30 and 35 °C, using five non-Newtonian fluid models independent of time: Ferrys, Robertson-Stiff, Williamson, Sisko, and Ellis de Haven. The classical method consists in carrying out regression analysis. Using a comparative procedure of determination coefficients and variances, the model that most appropriately adjusts the experimental data to said model is selected. From the statistical point of view, the Sisko and Robertson-Stiff models present better regression parameters; to better specify the choice of the respective rheological model, a new factor has been proposed in the literature, the viscosity factor (VF), which expresses the relationship between apparent and dynamic viscosity. The analysis of this factor for the five models confirms the greater stability of the Ellis de Haven model in terms of the coefficient of variation of the VF. The value of VF fluctuates between 1 and 2 for all ranges of temperature and concentration experienced for vinyl alcohol solutions. As a consequence of the above, for the choice of the non-Newtonian fluid model associated with the rheology of the aqueous solution of polyvinyl alcohol, it is necessary to analyze the statistical parameters and the VF factor simultaneously.
Funder
Universidad Nacional del Callao
Subject
Polymers and Plastics,General Chemistry
Reference50 articles.
1. Singh, R., Kumar, N., Mehrotra, T., Bisaria, K., and Sinha, S. (2021). Bioremediation for Environmental Sustainability: Toxicity, Mechanisms of Contaminants Degradation, Detoxification and Challenges, Elsevier. 2. Arango, M.C., Santana, W., Jaramillo-Quinceno, N., Rueda-Mira, S., and Álvarez-López, C. (2022). Ciencia Transdisciplinar en la Nueva era, Instituto Antioqueño de Investigación. 3. Caracterización de Hidrogeles de Quitosano-Alcohol Polivinílico Obtenidos Por Radiación Gamma;Rev. Iberoam. De Polímeros,2005 4. Instantaneous Dimensionless Numbers for Transient Nonlinear Rheology;Rogers;Rheol. Acta,2019 5. The Deborah Number;Reiner;Phys. Today,1964
|
|