Study on Erosion Wear of Single- and Double-Orifice Throttling Tools for Underground Coal Gasification

Abstract

In underground coal gasification, as a choke regulating the formation gas lift pressure, the throttling tool can effectively reduce the production cost, the number of ground heating and insertion equipment, and gas consumption. Because in this process, the coal is transformed into composite synthetic gas through a series of technical treatments, the throttling tool is in a working environment with high temperature and pressure. In the process of transportation of combined synthetic gas, the pulverized coal parts produced by incomplete coal combination move with the gas in the throttling tool. The high temperature and high-pressure gas carrying large-diameter pressed coal parts will cause serial erosion and wear to the throttling device, resulting in failure and well-controlled safety risks. Therefore, according to the Joule–Thomson effect, this paper independently designs downhole throttling tools with single- and double-hole structures. According to actual field conditions, the erosion wear of throttling tools with different systems in high-temperature gas–solid two-phase flow was simulated and predicted, and the internal flow field characteristics of throttling means were analyzed. The difference between the wall wear distribution, wall collision position, and wall erosion effect of different structure throttling mechanisms with the change in gas velocity was investigated, which guides the practical use of the subsequent throttling tools.