Pyrolysis Temperature Effects on Biochar–Water Interactions and Application for Improved Water Holding Capacity in Vineyard Soils

Abstract

Grapevine cane and stalks were considered for pyrolysis at 400 to 700 °C to produce biochar for increasing the water holding capacity of vineyard soil. Feedstocks were pyrolysed using a continuous feed reactor and the resulting biochars characterized in terms of physico-chemical properties, including water retention performance. Hydrophobicity was found in biochar from both feedstocks pyrolysed at 400 °C, but not at higher temperatures. At low soil matric potential, the pyrolysis temperature was the defining variable in determining water retention whereas at higher pressures, the feedstock was the more important variable. Available water content (AWC) of biochar increased with increasing pyrolysis temperatures, with optimal results obtained from grapevine cane at a pyrolysis temperature of 700 °C, which had an AWC 23% higher than a typical clay type soil. Principal component analysis showed variability in water retention of these biochars to be closely associated with the zeta potential, as well as the carbon and ionic content, suggesting that surface charge and hydrophobicity are key properties determining water holding capacity. Pure biochars were superior in water retention performance to typical sandy soils, and so biochar amendment of these soil types may improve water holding (particularly at field capacity). Further study with pot or field trials is recommended to confirm water retention behaviour and assess the feasibility of application under different viticultural scenarios.