Cyclodehydration of 1,4-butanediol over Zr-Al Catalysts: Effect of Reaction Medium

Abstract

The conversion of 1,4-butanediol (BDO) to tetrahydrofuran (THF) in aqueous phase is desirable because BDO production technology is shifting to bio-based aqueous fermentation routes. In this study, liquid-phase cyclodehydration of BDO to THF was studied in two reaction media (pure BDO and aqueous BDO feeds) at 200–240 °C using ZrO2-Al2O3 (ZA) mixed oxides, which were made with a co-precipitation method and were characterized with XRD, BET, SEM/EDX, pyridine and n-butylamine adsorptions. The maximum acidity and the largest surface area occurred at Zr/Al atomic ratios of 1/1 (ZA11) and 1/3 (ZA13), respectively. The reaction exhibited pseudo-first-order; aqueous BDO feed had much greater rate constant than pure BDO feed, ascribed to the acidic properties of adsorbed water molecules (coordinated to surface metal cations) for the former case. For pure BDO feed, linear relation was observed between rate constant and catalyst acidity, and ZA11 reached a THF yield of 90.1% at 240 °C. With aqueous BDO feed, rate constant increased linearly with increasing surface area and ZA13 reached a THF yield of 97.1% at 220 °C. The change of optimum catalyst composition with reaction medium suggests that active sites for catalyzing BDO cyclodehydration changed with the reaction environment.