Nanosecond Laser Induced Surface Structuring of Cadmium after Ablation in Air and Propanol Ambient

Abstract

In the present study KrF Excimer laser has been employed to irradiate the Cadmium (Cd) targets for various number of laser pulses of 500, 1000, 1500 and 2000, at constant fluence of 3.6 J cm−2. Scanning Electron Microscopy (SEM) analysis was utilized to reveal the formation of laser induced nano/micro structures on the irradiated target (Cd) surfaces. SEM results show the generation of cavities, cracks, micro/nano wires/rods, wrinkles along with re-deposited particles during irradiation in air, whereas subsurface boiling, pores, cavities and Laser Induced Periodic Surface Structures (LIPSS) on the inner walls of cavities are revealed at the central ablated area after irradiation in propanol. The ablated volume and depth of ablated region on irradiated Cd targets are evaluated for various number of pulses and is higher in air as compared to propanol ambient. Fast Fourier Transform Infrared spectroscopy (FTIR), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Diffraction (XRD) analyses show the presence of oxides and hydro-oxides of Cd after irradiation in propanol, whereas the existence of oxides is observed after irradiation in air ambient. Nano-hardness tester was used to investigate mechanical modifications of ablated Cd. It reveals an increase in hardness after irradiation which is more pronounced in propanol as compared to air.