Investigation on the Effect of Structural Parameters on Cavitation Characteristics for the Venturi Tube Using the CFD Method

Abstract

The venturi tube is a special kind of pipe which has been widely applied in many fields. Cavitation is one of the most important research issues for the Venturi tube. Hence, three key structural parameters (contraction angle, diffusion angle and contraction ratio) were selected to investigate the influence of different factors on cavitation characteristics, using the computational fluid dynamics (CFD) method. A series of experiments for measuring the relationship between differential pressure and flow rate were carried out to verify the accuracy of the simulation method. Results showed that the simulation results had a high accuracy and the numerical method was feasible. The average vapor volume fraction of cross-section from the throat in the axial direction increased with increasing contraction angle. The cavity length increased with increasing contraction angle. The average volume fraction in the diffusion section rapidly decreased with increasing diffusion angle. The diffusion angle had no significant effect on the cavitation characteristics in the throat section and had a significant influence in the diffusion section. The average vapor volume fraction increased with decreasing contraction ratio. The contraction ratio had no significant effect on the cavity length under the same differential pressure. The average vapor volume fraction increased with decreasing contraction ratio. However, the variation in the throat section was less than the diffusion section. Under the same inlet and outlet pressure, the cavity lengths for different contraction ratios were basically the same, which indicated that the contraction ratio had no significant effect on the cavity length.