A Numerical Study of the Suitability of Phase-Change Materials for Battery Thermal Management in Flight Applications

Abstract

Battery pack specific energy, which can be enhanced by minimising the mass of the battery thermal management system (BTMS), is a limit on electric fixed-wing flight applications. In this paper, the use of phase-change materials (PCMs) for BTMSs is numerically explored in the 3D domain, including an equivalent circuit battery model. A parametric study of PCM properties for effective thermal management is conducted for a typical one-hour flight. PCMs maintain an ideal operating temperature (288.15 K–308.15 K) throughout the entire battery pack. The PCM absorbs heat generated during takeoff, which is subsequently used to maintain cell temperature during the cruise phase of flight. In the control case (no BTMS), battery pack temperatures fall below the ideal operating range. We conduct a parametric study highlighting the insignificance of PCM thermal conductivity on BTMS performance, with negligible enhancement observed across the tested window (0.1–10 W m−1 K−1). However, the PCM’s latent heat of fusion is critical. Developers of PCMs for battery-powered flight must focus on enhanced latent heat of fusion, regardless of the adverse effect on thermal conductivity. In long-haul flight, an elongated cruise phase and higher altitude exasperate this problem. The unique characteristics of PCM offer a passive low-mass solution that merits further investigation for flight applications.