LOFF: LiDAR and Optical Flow Fusion Odometry
Author:
Zhang Junrui1ORCID, Huang Zhongbo1, Zhu Xingbao1, Guo Fenghe1, Sun Chenyang1, Zhan Quanxi1, Shen Runjie1ORCID
Affiliation:
1. The Department of Electronic and Information Engineering, Tongji University, Shanghai 200092, China
Abstract
Simultaneous Location and Mapping (SLAM) is a common algorithm for position estimation in GNSS-denied environments. However, the high structural consistency and low lighting conditions in tunnel environments pose challenges for traditional visual SLAM and LiDAR SLAM. To this end, this paper presents LiDAR and optical flow fusion odometry (LOFF), which uses a direction-separated data fusion method to fuse optical flow odometry into the degenerate direction of the LiDAR SLAM without sacrificing the accuracy. Moreover, LOFF incorporates detectors and a compensator, allowing for a smooth transition between general environments and degeneracy environments. This capability facilitates the stable flight of unmanned aerial vehicles (UAVs) in GNSS-denied tunnel environments, including corners and long-distance consistency. Through real-world experiments conducted in a GNSS-denied pedestrian tunnel, we demonstrate the superior position accuracy and trajectory smoothness of LOFF compared to state-of-the-art visual SLAM and LiDAR SLAM.
Funder
Hubei Technology Innovation Center for Smart Hydropower, Hubei
Reference36 articles.
1. Unmanned aerial vehicle communications for civil applications: A review;Ghamari;IEEE Access,2022 2. Kim, I.H., Jeon, H., Baek, S.C., Hong, W.H., and Jung, H.J. (2018). Application of crack identification techniques for an aging concrete bridge inspection using an unmanned aerial vehicle. Sensors, 18. 3. Mejía, A., Marcillo, D., Guaño, M., and Gualotuña, T. (2020, January 27). Serverless based control and monitoring for search and rescue robots. Proceedings of the 2020 15th Iberian Conference on Information Systems and Technologies (CISTI), Seville, Spain. 4. Huang, D., Chen, J., Chen, Y., Hang, S., Sun, C., Zhang, J., Zhan, Q., and Shen, R. (2023, January 17–19). Monocular Visual Measurement Based on Marking Points Regression and Semantic Information. Proceedings of the 2023 China Automation Congress (CAC), Chongqing, China. 5. Shahmoradi, J., Mirzaeinia, A., Roghanchi, P., and Hassanalian, M. (2020, January 6–10). Monitoring of inaccessible areas in gps-denied underground mines using a fully autonomous encased safety inspection drone. Proceedings of the AIAA Scitech 2020 Forum, Orlando, FL, USA.
|
|