Pulse Accumulation Approach Based on Signal Phase Estimation for Doppler Wind Lidar

Abstract

Coherent Doppler wind lidar (CDWL) uses transmitted laser pulses to measure wind velocity distribution. However, the echo signal of CDWL is easily affected by atmospheric turbulence, which can decrease the signal-to-noise ratio (SNR) of lidar. To improve the SNR, this paper proposes a pulse accumulation method based on the cross-correlation function to estimate the phase of the signal. Compared with incoherent pulse accumulation, the proposed method significantly enhances the correlation between signals from different periods to obtain high SNR gains that arise from pulse accumulation. Using simulation, the study evaluates the effectiveness of this phase estimation method and its robustness against noise in algorithms which analyze Doppler frequency shifts. Furthermore, a CDWL is developed for measuring the speed of an indoor motor turntable and the outdoor atmospheric wind field. The phase estimation method yielded SNR gains of 28.18 dB and 32.03 dB for accumulation numbers of 500 and 1500, respectively. The implementation of this method in motor turntable speed measurements demonstrated a significant reduction in speed error—averaging 9.18% lower than that of incoherent accumulation lidar systems. In experiments that measure atmospheric wind fields, the linear fit curve slope between the measured wind speed and the wind speed measured via a commercial wind-measuring lidar can be reduced from 1.146 to 1.093.