Impact of H2 Blending of Methane on Micro-Diffusion Combustion in a Planar Micro-Combustor with Splitter

Abstract

An investigation into the non-premixed combustion characteristics of methane in a planar micro-combustor with a splitter was performed. The impact of blending methane with hydrogen on these characteristics was also analyzed. Additionally, the effects of inlet velocity and global equivalence ratio on flame location, flame temperature, combustion efficiency and outer wall temperature were studied for three different fuel compositions: pure methane (MH0), 60% methane with 40% hydrogen (MH40), and 40% methane with 60% hydrogen (MH60)). A heat recirculation analysis of the combustor wall was conducted to determine the amount of heat recirculated into the unburnt gas at various inlet velocities for all three fuel compositions. The results demonstrated that the stability limit of methane in terms of inlet velocity (1–2 m/s) and global equivalence ratio (1.0–1.2) was significantly enhanced to 1–3 m/s and 0.8–1.2, respectively, with the addition of hydrogen. At an inlet velocity of 2 m/s, the flame location of 3.6 mm for MH0 was significantly improved to 2.2 mm for MH60. Additionally, outer wall temperature exhibited a rise of 100 K for MH60 compared to MH0. Furthermore, from heat recirculation analysis, when the ratio of heat recirculated to heat loss exceeded unity, the flame started exhibiting the lift-off phenomenon for all the fuel compositions.