Abstract
Pressure vessels are subjected to deterioration and damage, which can significantly reduce their strength and loading capabilities. Among several procedures nowadays available to repair damaged steel pipelines, composite-repairing systems have become popular over the past few years to restore the loading capacity of damaged pipelines. This study reports a numerical-experimental investigation performed for a composite-repaired pipeline made of API 5L X60 steel. An experimental burst test was carried out on a 4 m long pipe section, closed by two lateral caps, and tested up to failure by means of high-pressure water. In parallel, the test was numerically replicated through a FEM model of the composite-repaired steel tank, allowing for a cross-comparison of results. It was found that the composite repairing system has almost eliminated both the noteworthy thickness reduction of 80% and the related stress concentrations in the pipe body. These outcomes allow for a better understanding of these repairing procedures in order to drive their subsequent optimization.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference47 articles.
1. Trenchless Repair of Concrete Pipelines Using Fiber-Reinforced Polymer Composites;Pridmore,2015
2. An assessment of the effect of steel pipeline wall losses on the maximum allowable operating pressure of a gas pipeline;Witek;J. Pipeline Eng.,2014
3. EMAT technology applied to high pressure gas pipelines diagnostic, SIGMA NOT Publishing House;Witek;Gaz Woda Tech. Sanit.,2015
4. Failure analysis and design of grouted fibre-composite repair system for corroded steel pipes
5. Composite repair of through-wall defects in pipework – Analytical and numerical models with respect to ISO/TS 24817
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献