Experimental Investigation of Deposition Pattern on the Temperature and Distortion of Direct Energy Deposition-Based Additive Manufactured Part

Abstract

The effect of deposition pattern on the temperature and global distortion of Direct Metal Tooling (DMT) based Additive Manufactured (AM) is investigated through the experimental results of laser deposited SUS316. DMT is one of the Directed Energy Deposition (DED) processes. In situ temperature measurements were used to monitor the temperature of the substrates and global distortion patterns were analyzed using CMM (coordinate Measuring Machine) after the deposition. Six different patterns combining long raster and short raster patterns were considered for the case studies. The results showed that the deposition pattern affects the temperature gradient and that the peak temperature of each layer can increase or decrease according to the sequence of the deposition pattern. Also, the pattern of the first layer had a dominant influence on the longitudinal bending deflection that occurs. Based on these results, appropriate tool path schedule can be utilized to control not only the distortion but also the peak temperature of the DMT-based AM parts.