Affiliation:
1. Henan Institute of Science and Technology, Xinxiang 453003, China
2. Postdoctoral Station, Henan University of Science and Technology, Luoyang 471000, China
Abstract
Abrasive water jetting is an effective dressing method for a fixed abrasive pad (FAP) and can improve FAP machining efficiency and the impact of abrasive water jet (AWJ) pressure on the dressing effect; moreover, the machining state of FAP after dressing has not been thoroughly studied. Therefore, in this study, the FAP was dressed by using AWJ under four pressures, and the dressed FAP was subjected to lapping experiments and tribological experiments. Through an analysis of the material removal rate, FAP surface topography, friction coefficient, and friction characteristic signal, the influence of AWJ pressure on the friction characteristic signal in FAP processing was studied. The outcomes show that the impact of the dressing on FAP rises and then falls as the AWJ pressure increases. The best dressing effect was observed when the AWJ pressure was 4 MPa. In addition, the maximum value of the marginal spectrum initially rises and then falls as the AWJ pressure increases. When the AWJ pressure was 4 MPa, the peak value of the marginal spectrum of the FAP that was dressed during processing was the largest.
Funder
the national natural science foundation of China
Project funded by China Postdoctoral Science Foundation
Subject
Electrical and Electronic Engineering,Mechanical Engineering,Control and Systems Engineering
Reference31 articles.
1. A Model of Chemical Mechanical Planarization of Patterned Wafers with Fixed Abrasives;Subramanin;Electrochem. Solid-State Lett.,2001
2. Diamond fixed abrasive lapping of brittle substrates;Fletcher;Ind. Diam. Rev.,2004
3. On the mechanism of material removal by fixed abrasive lapping of various glass substrates;Cho;Wear,2013
4. Effects of abrasive tools on surface finishing under brittle-ductile grinding regimes when manufacturing glass;Demirci;J. Mater. Process. Technol.,2010
5. A case for 2-body material removal in prime led sapphire substrate lapping and polishing;Gacliardi;J. Manuf. Process.,2013