Abstract
The present study utilizes a density-based topology optimization method to design a serpentine channel under turbulent flow, solving a high pressure loss issue and enhancing heat transfer capability. In the topology optimization, the k–ε turbulence model is modified by adding penalization terms to reveal turbulence effects. Heat transfer modeling is included by setting the modified energy equation with additional terms related to topology optimization. The main objective is to minimize pressure loss while restricting heat transfer. The 2D simplified model is topologically optimized. Then, the optimal solution with intermediate results is extruded in the 3D system and interpreted with triply periodic minimal surfaces (TPMS) to further enhance heat transfer performance. Compared to the baseline serpentine channel, the optimized model infilled with the diamond-TPMS structure lowers pressure loss by 30.8% and significantly enhances total heat transfer by up to 45.8%, yielding thermal performance of 64.8% superior to the baseline. The temperature uniformity is also improved. The simulation results show that the curvatures in the optimized model with diamond-TPMS structure eliminate the large recirculation flow and low heat transfer regions. This model diminishes the effect of Dean’s vortices but promotes high turbulent kinetic energy, leading to better uniform flow and heat transfer distributions.
Funder
National Natural Science Foundation of China
the National Science and Technology Major Project
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献