Affiliation:
1. School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang 471003, China
2. Longmen Laboratory, Luoyang 471003, China
3. Henan Key Laboratory for Machinery Design and Transmission System, Henan University of Science and Technology, Luoyang 471003, China
Abstract
Accurately extracting faulty sound signals from belt conveyor rollers within the high-noise environment of coal mine operations presents a formidable challenge. To address this issue, this study introduces an innovative fault diagnosis method that merges the variational modal de-composition (VMD) model with the Swin Transformer deep learning network model. First, the study employed the adaptive VMD method to eliminate intense noise from the original signal of the rollers, while also assessing the reconstruction accuracy of the VMD signal across different modal components. Subsequently, we delved into the impact of the parameter structure of the Swin Transformer network model on the fault diagnosis accuracy. Finally, the accuracy of the method was validated using a sound test dataset from the rollers. The results indicated that optimizing the K-value of the VMD method effectively reduced the noise in the reconstructed signal, and the Swin Transformer excelled in extracting both local and global features. Specifically, on the conveyor roller sound dataset, it was shown that, after the VMD reconstruction of the signal so that the highest Pearson correlation coefficient corresponded to a modal component of 3 and adjusting the parameters of the Swin Transformer coding layer, the combination of the VMD+Swin-S model achieved an accuracy of 99.36%, while the VMD+Swin-T model achieved an accuracy of 98.6%. Meanwhile, the accuracy of the VMD+Swin-S model was higher than that of the VMD + CNN model combination, with 95.4% accuracy, and the VMD+ViT model, with 97.68% accuracy. In the example application experiments, compared with other models the VMD+Swin-S model achieved the highest accuracy rate at all three speeds, with 98.67%, 98.32%, and 97.65%, respectively. Overall, this approach demonstrated high accuracy and robustness, rendering it an optimal choice for diagnosing conveyor belt roller faults within environments characterized by strong noise.
Funder
National Key R & D Program of China
Longmen Laboratory Frontier Exploration Project
Major Science and Technology Projects of Longmen Laboratory
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering
Reference30 articles.
1. Audio-based Fault Diagnosis for Belt Conveyor Rollers;Yang;Neurocomputing,2020
2. Bearing Fault Diagnosis of a PWM Inverter Fed-Induction Motor Using an Improved Short Time Fourier Transform;Khodja;J. Electr. Eng. Technol.,2019
3. Low Latency Bearing Fault Detection of Direct-drive Wind Turbines Using Stator Current;Nath;IEEE Access,2020
4. Intelligent Fault Diagnosis of Rolling Bearing Using FCM Clustering of EMD-PWVD Vibration Images;Fan;IEEE Access,2020
5. Remaining Useful Life Prediction and Fault Diagnosis of Rolling Bearings Based on Short-Time Fourier Transform and Convolutional Neural Network;Zhou;Shock Vib.,2020
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
1. Study of an underdetermined blind source separation method applied to acoustic inspection of rollers;International Conference on Image, Signal Processing, and Pattern Recognition (ISPP 2024);2024-06-13