Adaptive Noise-Resistant Low-Power ASK Demodulator Design in UHF RFID Chips

Abstract

This paper presents a new signal demodulator for ultra-high frequency (UHF) radio frequency identification (RFID) tag chips. The demodulator is used to demodulate amplitude shift keying (ASK) modulated signals with the advantages of high noise immunity, large input range and low power consumption. The demodulator consists of a charge pump, an envelope detector, and a comparator. In particular, the demodulator provides a hysteresis input signal to the comparator through two envelope detectors, resulting in better noise immunity. The demodulator is based on a standard 0.13 µm CMOS process. The demodulator is suitable for demodulating high frequency signals at 900 MHz with a data rate of 128 Kbps and can operate up to 78 °C. The input signal has a peak of 1.2 V and consumes as little as 113.6 nW. The demodulator also has a noise immunity threshold of approximately 3.729 V.