Affiliation:
1. School of Traffic & Transportation Engineering, Central South University, Changsha 410075, China
2. CRRC Changchun Railway Vehicles Co., Ltd., Changchun 130062, China
Abstract
In this study, a control scheme is proposed based on Chaotic Particle Swarm Optimization (CPSO) to enhance the Linear Auto-Disturbance Rejection Controller (LADRC). The focus is on addressing the challenge of high-precision variations in angle-of-attack through dual-motor cooperative control within the lifting wing of a high-speed train. The scheme initiates with the design of a dual-loop structure for LADRC, integrating position and current control. The position loop is further refined. Subsequently, the CPSO algorithm is employed to optimize the parameters of the LADRC controller. Ultimately, the loop is closed by feeding back the position error in the cross-coupled structure to the current loop, thereby achieving high-precision control. The performance of the proposed structure is validated through both Matlab/Simulink simulations and an experimental platform. The experimental results demonstrate that CPSO-LADRC, in comparison to traditional LADRC and Proportion-Integration-Differentiation (PID) control, exhibits an increase in the maximum response time by 3.76 s and 3.3 s, respectively, a reduction in overshoot by 1.12% and 0.8%, as well as a decrease in the maximum synchronization error by 0.45 cm and 1 cm, respectively. These findings validate the effectiveness of the proposed synchronous loop controller method in simplifying computational complexity, enhancing system responsiveness, robustness, and synchronization performance. Additionally, our approach facilitates precise angle-of-attack transformation for the lifting wings of high-speed trains effectively.
Funder
National Key R&D Program of China
Reference27 articles.
1. Series synchronization control of multi-servo motors;Xu;Electr. Autom.,2001
2. Lorenz, R.D., and Schmidt, P.B. (1989, January 1–5). Synchronized motion control for process automation. Proceedings of the Conference Record of the IEEE Industry Applications Society Annual Meeting, San Diego, CA, USA.
3. Payette, K. (1998, January 26). The virtual shaft control algorithm for synchronized motion control. Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207), Philadelphia, PA, USA.
4. From PID technology to “self-disturbance control” technology;Han;Control Eng.,2002
5. Generic Neural Locomotion Control Framework for Legged Robots;Thor;IEEE Trans. Neural. Netw. Learn. Syst.,2021