Modeling of a Compact, Implantable, Dual-Band Antenna for Biomedical Applications

Author:

Bahrouni Majdi123,Houzet Gregory23,Vuong Tan Phu2,Mendes Paulo M.45ORCID,Dinis Hugo45,Silva Rui45ORCID,Trabelsi Hichem6

Affiliation:

1. Microwave Electronics Research Laboratory, Department of Physics, Faculty of Sciences of Tunis, University of Tunis El Manar, Tunis 2092, Tunisia

2. Institute of Microelectronics Electromagnetism and Photonics-Microwave Laboratory and Characterization, Grenoble INP, Grenoble Alps University, 38000 Grenoble, France

3. Institute of Microelectronics Electromagnetism and Photonics-Microwave Laboratory and Characterization, Université Savoie Mont Blanc, 73000 Le Bourget du Lac, France

4. Center for MicroElectromechanical Systems (CMEMS-UMinho), University of Minho, 4800-058 Guimarães, Portugal

5. LABBELS—Associate Laboratory, 4710-057 Braga, Portugal

6. National School of Engineers of Carthage, University of Carthage, Charguia II 2035, Tunisia

Abstract

Different implantable antenna designs exist to establish communication with implantable devices depending on the domain of use and the implantation space. Owing to their nature and purposes, these antennas have many imposed criteria on various characteristics, such as bandwidth, multiband behavior, radiation pattern, gain, and specific absorption rate (SAR). This presents a challenge when it comes to achieving satisfying results without a major compromise in any of these crucial parameters. Additionally, many of the existing designs do not follow a specific approach to obtain results. Measuring different parameters of such fabricated structures requires special conditions and special environments mimicking the tissues where they are supposed to be placed. For such issues, the use of biological or synthetic phantoms is widely employed to validate what is obtained in simulation, and a multitude of formulas exist for the creation of such phantoms, each with its advantages and drawbacks. In this paper, a miniature dual-band structure derived from the first iteration of the Koch fractal structure is designed to operate 2 mm below the skin in the arm of the human body, with the MICS (Medical Implant Communication System) and ISM (Industrial, Scientific, Medical) 2.4 GHz bands. The purposes of the design are to derive structures from commonly used shapes with certain behavior while maintaining miniaturization, and to easily design dual-band implantable antennas. More than one band is used to diversify uses, since bands such as the MICS band are mainly dedicated to telemetry. The structure is characterized not only by its low profile compared to various structures found in the literature with dimensions of 17.2 × 14.8 × 0.254 mm3, but also its ease of design, independent shifting of resonant frequencies, and the absence of the need for a matching circuit and a shorting pin (via) for miniaturization. It exhibits satisfying performance: bandwidths of 23 MHz in the MICS band and 190 and 70 MHz in the vicinity of the ISM 2.4 GHz band, and measured gain in the latter band of −18.66 and −17 dBi in the azimuth and elevation radiation patterns, respectively. To validate the antenna’s properties in a skin-mimicking environment, two simple phantom formulas found in the literature were explored and compared in order to identify the best option in terms of accuracy and ease of fabrication.

Publisher

MDPI AG

Subject

Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering

Cited by 3 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3