Affiliation:
1. Institute of Control Theory, Faculty of Electrical and Computer Engineering, TUD Dresden University of Technology, 01062 Dresden, Germany
Abstract
This article presents a buck converter in which the inductor has been replaced by a transmission line. This approach would be practically conceivable if the power supply and load had a greater spatial distance. Alternatively, the model derived in this way could also be regarded as an intermediate model in order to replace a power coil via discretization with a larger number of smaller coils and capacitors. In the time domain, this new converter can be described by a system of coupled partial and ordinary differential equations. In the frequency domain, a transcendental transfer function is obtained. For comparison with an equivalently parameterized conventional converter, Padé approximants are derived. A linear controller is designed for the converter topology under consideration.
Reference47 articles.
1. Bacha, S., Munteanu, I., and Bratcu, A.I. (2014). Power Electronic Converters Modeling and Control, Springer.
2. Buck and boost converters with transmission lines;Sander;IEEE Trans. Power Electron.,2012
3. Sander, S., and Karvonen, A. (2013, January 2–6). Semiconductor component reduction in AC/DC converters with transmission lines. Proceedings of the 15th European Conference on Power Electronics and Applications (EPE), Lille, France.
4. Röbenack, K., and Bärnklau, H. (2023, January 11–13). A Spatially Distributed Boost Converter – Modeling and Simulation. Proceedings of the International Conference on System Theory, Control and Computing (ICSTCC), Timisoara, Romania.
5. Huang, C., Woittennek, F., and Röbenack, K. (2013, January 8–12). Steady-state analysis of a distributed model of the buck converter. Proceedings of the European Conference on Circuit Theory and Design (ECCTD), Dresden, Germany.