Author:
da Rocha Farias Luiz,Monteiro Lucas,Leme Murilo,Stevan Sergio
Abstract
This paper presents a performance analysis based on a practical approach of narrowband communication through power lines (Power Line Communication—PLC) to the last-mile industrial environment. A kit for developing PLC based applications, in accordance with the G3-PLC standard, was used for the analysis. Experimental tests and results are presented for different scenarios of noise to represent a last-mile industrial environment. The influence of noise insertion in the PLC channel is presented turned on and off a set of inverters and motors, in order to verify the influence of these elements on the performance of the evaluated communication. As a comparative basis, the maximum standard transmission distance of the AS-Interface industrial network standard was used. This standard is widely used in industrial environments for communication between factory floor sensors and actuators. The propose for last-mile to Industry 4.0 can be considered with the results in applications with a large number of sensors. Recommendations regarding the modulation technique and data packet size are presented. Based in this analysis, it can be concluded that the G3-PLC communication standard and its ROBO modulation technique meet the requirements of being used mainly in the last-mile industrial communication, mainly for industrial supervision or control applications where response time is not critical. The last point empirically analyzed concluded that the insertion of the inductive impedance can severely affect the transmission is inserted into the side of the PLC modem transmitter.
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering
Cited by
16 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献