Affiliation:
1. College of Electrical Engineering and New Energy, Three Gorges University, Yichang 443002, China
2. Hubei Electric Power Corporation, State Grid Corporation of China, Yichang 443002, China
Abstract
The power factor of wireless power transfer system, determined by its compensation network part, is easily affected by parameter detuning, coil misalignment, and load variation. In this paper, a mathematical model for the compensation network part is established. Theoretical analysis shows that the inverter part can be considered as a negative resistor by deducing the inherent static-state frequency solution of the compensation network part. Therefore, the unity power factor wireless power transfer system can be maintained under any possible operation conditions by tracking the inherent static-state frequency solution. More importantly, no digital controller or parameter identification or information interactions between the primary and secondary coils are needed during the tracking process. Compared with previous unity power factor realization methods, the proposed tracking strategy has the advantages of fewer sampling variables, a faster response time, and a simpler regulation process. Finally, an experimental platform is built to test the practical performance of the proposed tracking strategy under many subnormal operation conditions. Our experimental results show that approximate unity power factor can be realized at 10–15 cm coil misalignment distance and 30–90 Ω load variation range.
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering