Abstract
This article presents a four-element multiple-input multiple-output (MIMO) antenna design for next-generation millimeter-wave (mmWave) communication systems. The single antenna element of the MIMO systems consists of a T-shaped and plow-shaped patch radiator designed on an ultra-thin Rogers RT/Duroid 5880 substrate. The dimensions of the single antenna are 10 × 12 mm2. The MIMO system is designed by placing four elements in a polarization diversity configuration whose overall dimensions are 24 × 24 mm2. From the measured results, it is observed that the MIMO antenna provides 9.23 GHz impedance bandwidth ranging from 22.43 to 31.66 GHz. In addition, without the utilization of any decoupling network, a minimum isolation of 25 dB is achieved between adjacent MIMO elements. Furthermore, the proposed MIMO antenna system is fabricated, and it is noted that the simulated results are in good agreement with the measured results. Through the achieved results, it can be said that the proposed MIMO antenna system can be used in 5G mmWave radio frequency (RF) front-ends.
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering
Cited by
9 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献