Affiliation:
1. College of Civil Engineering, Xiangtan University, Xiangtan 411105, China
2. Industrial Development Research Center of Guizhou, Guizhou Institute of Technology, Guiyang 550003, China
Abstract
For the mine of large goaf, there are many factors that affect the filling quality. In order to improve the filling quality, it is necessary to identify the factors that have a significant impact. In this paper, the fuzzy mathematical method was used to analyze the five main factors (PC32.5cement sand ratio, slurry concentration, number of slurry lowering, dehydration and drainage, and tailing particle size grading) affecting the filling quality. The priority of each influence factor was calculated, and the priority set was established. It is found that the slurry launching point and particle size grading of the tailings have an obvious effect on filling quality. After increasing the slurry launching point and optimizing the particle size grading, the strength and uniformity of the filling body are improved.
Funder
National Natural Science Foundation of China
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference45 articles.
1. Further insight into the strength development of cemented paste backfill materials containing polycarboxylate ether-based superplasticizer;Fall;J. Build. Eng.,2022
2. Compressive fatigue behavior and failure evolution of additive fiber-reinforced cemented tailings composites;Li;Int. J. Miner. Metall. Mater.,2022
3. Physicochemical mechanism of structure formation and strengthening in the backfill massif when filling underground cavities;Petlovanyi;Vopr. Khimii I Khimicheskoi Tekhnologii,2020
4. Models and algorithms of choice of development technology of deposits when selecting the composition of the backfilling mixture;Kongarsyuryun;IOP Conf. Ser. Earth Environ. Sci.,2021
5. Khayrutdinov, M.M., Golik, V.I., Aleksakhin, A.V., Trushina, E.V., Lazareva, N.V., and Aleksakhina, Y.V. (2022). Proposal of an algorithm for choice of a development system for operational and environmental safety in mining. Resources, 11.