Optimization of Exergy Efficiency in a Walking Beam Reheating Furnace Based on Numerical Simulation and Entropy Generation Analysis

Abstract

An analysis of entropy generation and exergy efficiency can effectively explore the energy-saving potential of reheating furnaces. This paper simulated the combustion, flow, and heat transfer in a walking beam reheating furnace by establishing a half-furnace model. The entropy generation rate distribution of different thermal processes was numerically calculated. The effect of slab residence time and fuel distribution in the furnace was studied to optimize exergy efficiency. The results indicated that combustion and radiative heat transfer are the primary sources of entropy generation. Irreversible losses accounted for 26.39% of the total input exergy, in which the combustion process accounted for 16.43%, and radiative heat transfer accounted for 8.47%. Reducing the residence time by 60 min decreased irreversible exergy loss by about 2.5% but increased heat dissipation and exhaust exergy loss by 5.8%. Energy saving can only be achieved when the heat exchanger’s exergy recovery efficiency exceeds 36% under different fuel supplies. Keeping the total fuel supply unchanged, increasing the fuel mass flow rate in heating-I zone while decreasing it in heating-II zone resulted in a 1.5% decrease in exergy efficiency. This study provides new insights into the energy-saving potential of reheating furnaces.