Metal Nanoparticle Film Deposition by Femtosecond Laser Ablation at Atmospheric Pressure

Abstract

Nanoparticle gold films were deposited using femtosecond laser ablation in argon at atmospheric pressure in an arrangement where a flat Au target was irradiated through a transparent substrate in close proximity. Spatially extended films were made by rastering the target and substrate assembly together in the laser beam. Fast imaging clearly showed pronounced narrowing of the ablation plume, which can be understood in terms of laser induced multiphoton ionisation and heating of the gas near the ablation site. Deposition was possible for target-substrate separation up to 2 mm. The equivalent thickness of the nanoparticle film was controlled in the range 0.4–28 nm by changing the target-substrate separation and the shot-to-shot spacing of ablation spot raster. The mean Feret diameter varied in the range 14–40 nm depending on the deposition conditions, and all the films showed a surface plasmon resonance at about 525 nm, which was nearly independent of the equivalent thickness. The technique can readily be applied to other materials for the fabrication of nanoparticulate films at atmospheric pressure.