Design and Optimization of Microbial Fuel Cells and Evaluation of a New Air-Breathing Cathode Based on Carbon Felt Modified with a Hydrogel—Ion Jelly®
Author:
Carvalho Rui N. L.1, Monteiro Luisa L.1ORCID, Sousa Silvia A.1ORCID, Ramanaiah Sudarsu V.2, Leitão Jorge H.3ORCID, Cordas Cristina M.4ORCID, Fonseca Luis P.3ORCID
Affiliation:
1. Institute for Bioengineering and Biosciences (iBB), Instituto Superior Técnico (IST), Universidade de Lisboa (UL), Av. Rovisco Pais, 1049-001 Lisboa, Portugal 2. Food and Biotechnology Research Lab, South Ural State University (National Research University), 454080 Chelyabinsk, Russia 3. Department of Bioengineering (DBE), Institute for Bioengineering and Biosciences (iBB), The Associate Laboratory Institute for Health and Bioeconomy (i4HB), Instituto Superior Tecnico (IST), Universidade de Lisboa (UL), Avenida Rovisco Pais, 1049-001 Lisboa, Portugal 4. Associated Laboratory for Green Chemistry of the Network of Chemistry and Technology (LAQV-REQUIMTE), Department of Chemistry, NOVA School of Science and Technology, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
Abstract
The increased demand for alternative sustainable energy sources has boosted research in the field of fuel cells (FC). Among these, microbial fuel cells (MFC), based on microbial anodes and different types of cathodes, have been the subject of renewed interest due to their ability to simultaneously perform wastewater treatment and bioelectricity generation. Several different MFCs have been proposed in this work using different conditions and configurations, namely cathode materials, membranes, external resistances, and microbial composition, among other factors. This work reports the design and optimization of MFC performance and evaluates a hydrogel (Ion Jelly®) modified air-breathing cathode, with and without an immobilized laccase enzyme. This MFC configuration was also compared with other MFC configuration performances, namely abiotic and biocathodes, concerning wastewater treatment and electricity generation. Similar efficiencies in COD reduction, voltage (375 mV), PD (48 mW/m2), CD (130 mA/m2), and OCP (534 mV) were obtained. The results point out the important role of Ion Jelly® in improving the MFC air-breathing cathode performance as it has the advantage that its electroconductivity properties can be designed before modifying the cathode electrodes. The biofilm on MFC anodic electrodes presented a lower microbial diversity than the wastewater treatment effluent used as inocula, and inclusively Geobacteracea was also identified due to the high microbial selective niches constituted by MFC systems.
Funder
Fundação para a Ciência e a Tecnologia projects Associate Laboratory Institute for Health and Bioeconomy—i4HB project Associate Laboratory for Green Chemistry—LAQV Fundação para a Ciência e Tecnologia FCT Institute for Bioengineering and Biosciences—iBB Programa Operacional Regional de Lisboa 2020
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Reference76 articles.
1. (2023, April 02). Agenda for Sustainable Development UN 2030. Available online: https://www.un.org/sustainabledevelopment/developement-agenda/. 2. Optimization of WWTP aeration process upgrades for energy efficiency;Bell;Water Pract. Technol.,2011 3. Life cycle assessment of energy and energy carriers from waste matter—A review;Quek;J. Clean. Product.,2014 4. Is Microbial Fuel Cell Technology Ready? An Economic Answer towards Industrial Commercialization;Trapero;Appl. Energy,2017 5. Gurav, R., Bhatia, S.K., Choi, T.-R., Kim, H.-J., Lee, H.-J., Cho, J.-Y., Ham, S., Suh, M.-J., Kim, S.-H., and Kim, S.-K. (2021). Seafood Processing Chitin Waste for Electricity Generation in a Microbial Fuel Cell Using Halotolerant Catalyst Oceanisphaera arctica YHY1. Sustainability, 13.
|
|