Abstract
Pulsating heat pipe is a promising two-phase heat transfer device that has many advantages such as a simple wickless structure and high thermal performance. Its thermal behavior is inherently time-dependent, and it can also be characterized by substantial spatial variations. However, there are few studies investigating the interaction or similarity of the local physical quantities, such as heat fluxes exchanged between the working fluid and the device wall in adjacent branches. In the present work, a new approach based on the application of cross-correlation analysis to local heat fluxes is proposed to deepen the understanding of the flow characteristics in pulsating heat pipes. The temperature distribution in the condenser of a seven-turn pulsating heat pipe was measured with an infrared camera, changing the power input. The local heat flux distributions were estimated by solving the inverse heat conduction problem in the tube wall. The cross-correlation of the heat fluxes at different positions of central and edge tubes in the condenser was analyzed. The result revealed the different trends in the cross-correlation depending on the power input: there were no clear cross-correlations in 0.5 W, while it was shown more clearly on the diagonal line with increasing power input to 2 W and 3.5 W because of the more activated flow throughout the heat pipe than that of the low power input. Moreover, the results of 3.5 W indicated a synchronized flow. It is suggested that the original approach presented in this work would lead to a deeper understanding of the chaotic fluid oscillation in pulsating heat pipes.
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Reference40 articles.
1. Cooling a microprocessor chip;Proc. IEEE,2006
2. Emerging challenges and materials for thermal management of electronics;Mater. Today,2014
3. A review on the key issues for lithium-ion battery management in electric vehicles;J. Power Sources,2013
4. Pesaran, A., Santhanagopalan, S., and Kim, G.-H. (2013, January 11–14). Addressing the impact of temperature extremes on large format Li-ion batteries for vehicle applications. Proceedings of the 30th International Battery Seminar, Fort Lauderdale, FL, USA.
5. Thermal runaway mechanism of lithium ion battery for electric vehicles: A review;Energy Storage Mater.,2018
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献