Density and Refractive Index of Binary Ionic Liquid Mixtures with Common Cations/Anions, along with ANFIS Modelling

Abstract

Ionic liquids have many interesting properties as they share the properties of molten salts as well as organic liquids, such as low volatility, thermal stability, electrical conductivity, non-flammability, and much more. Ionic liquids are known to be good solvents for many polar and nonpolar solutes. Combined with their special properties, ionic liquids are good replacements for the conventional toxic and volatile organic solvents. Each ionic liquid has different properties than others. In order to alter, tune, and enhance the properties of ionic liquids, sometimes, it is necessary to mix different ionic liquids to achieve the desired properties. However, using mixtures of ionic liquids in chemical processes requires reliable estimations of the mixtures’ physical properties such as refractive index and density. The ionic liquids used in this work are 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([HMIM][BF4]), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF6]). These ionic liquids were supplied by Io-li-tec and used as received. However, new measurements for the density and refractive index were taken for the pure ionic liquids to be used as reference. In the present work, the densities and refractive indices of four different binary mixtures of ionic liquids with common cations and/or anions have been measured at various compositions and room conditions. The accuracy of different empirical mixing rules for calculation of the mixtures refractive indices was also studied. It was found that the overall absolute average percentage deviation from the ideal solution in the calculation of the molar volume of the examined binary mixtures was 0.78%. Furthermore, all of the examined mixing rules for the calculation of the refractive indices of the mixtures were found to be accurate. However, the most accurate empirical formula was found to be Heller’s relation, with an average percentage error of 0.24%. Furthermore, an artificial intelligence model, an adaptive neuro-fuzzy inference system (ANFIS), was developed to predict the density and refractive index of the different mixtures studied in this work as well as the published literature data. The predictions of the developed model were analyzed by various methods including both statistical and graphical approaches. The obtained results show that the developed model accurately predicts the density and refractive index with overall R2, RMSE, and AARD% values of 0.968, 7.274, 0.368% and 0.948, 7.32 × 10−3 and 0.319%, respectively, for the external validation dataset. Finally, a variance-based global sensitivity analysis was formed using extended the Fourier amplitude sensitivity test (EFAST). Our modelling showed that the ANFIS model outperforms the best available empirical models in the literature for predicting the refractive index of the different mixtures of ionic liquids.