Mechanical Properties and Toxicity Risks of Lead-Zinc Sulfide Tailing-Based Construction Materials

Abstract

The leaching residue of the lead–zinc sulfide tailing (LRT) is the only residue generated from the tailing leaching recovery process; it is a typical hazardous material for its high heavy-metal contents and high acidity. Due to the large output of LRT, and because its main components are Ca, Si, and Al, the preparation of building construction materials with LRT was studied. The results showed that when the LRT addition is less than 47%, with the ordinary Portland cement (OPC) and fly ash (FA) added and the curing conditions appropriate, the strength values of the tested specimens meet the M15 Class of the autoclaved lime sand brick standard (GB/T 16753-1997). The carbonization coefficient and drying shrinkage of the specimen were 0.79 and smaller than 0.42, respectively. As the SEM, TG, and XRD analysis have shown, the LRT can chemically react with additives to form stable minerals. The heavy metal contents that were leached out well met the limits in GB5085.3-2007. Based on the high addition of the LRT, the good strength and lower heavy metals were leached out of the prepared test specimen, and the tailing could be reused completely with the leaching recovery and the LRT reuse process. LRT can be used to replace OPC, allowing more sustainable concrete production and improved ecological properties of LRT.