Investigation of the Usage Properties of Steel Slag as Pigment in Low-Temperature Glaze-Reference-Cited by-同舟云学术

Investigation of the Usage Properties of Steel Slag as Pigment in Low-Temperature Glaze

Published:2023-10-18 Issue:5 Volume:27 Page:1088-1096
ISSN:2147-835X
Container-title:Sakarya University Journal of Science
language:
Short-container-title:

Author:

KOÇ Muhterem¹^ORCID,TAŞÇI Eda¹^ORCID

Affiliation:

1. Kütahya Dumlupınar Üniversitesi

Abstract

The evaluation of industrial wastes in the ceramics industry has been the subject of research studies in recent years. This study investigated the use of steel slag as a colouring pigment in ceramic glazes. The colour effects of 45 compositions created with a triple-phase diagram with steel slag, CoO, and Cr2O3 on low-temperature glaze composition were determined. The microstructural evaluation of the selected colours by SEM and EDX analysis were carried out.The prepared glaze compositions were applied by pouring on the high silica ceramic body. Glazed tiles were sintered in a muffle furnace at 950 ℃ and then L*a*b colour and gloss brightness values were measured. By using steel slags instead of Fe2O3, black glazes were obtained in the triple diagram.

Funder

T.C. Cumhurbaşkanlığı Strateji ve Bütçe Başkanlığı/ T.R. Presidential Strategy and Budget Department

Publisher

Sakarya University Journal of Science

Subject

General Medicine

Reference25 articles.

1. Z. Bayer Öztürk, K. Pekkan, E. Taşçı, S. Yılmaz, “The effect of granulated lead–zinc slag on aestheticand microstructural properties of single-fired wall tile glazes”, Journal of the Australian Ceramic Society, vol. 56, no. 2, pp. 609-617, 2020.

2. Z. Bayer Öztürk, B. Atay, M. Çakı, N. Ay, “An investigation of color development by means of the factorial design in wall tile glazes with ferrochromium fly ash”, Indian Journal of Engineering and Materials Sciences, vol. 22, pp. 215–224, 2015.

3. L.Koroğlu, C. Pekşen, “The Replacement of Seashells with Calcite in White Ceramic Glaze Preparation”, Sakarya University Journal of Science, vol. 24, pp. 956-964, 2020.

4. M.Topal, E. Işıl Arslan Topal, S. Aslan, M. Kılıç, “Termik santral Uçucu külü, curufu ve arıtma çamurundan ağır metallerin liçlenebilirliği”, Sakarya University Journal of Science, vol. 15-2, pp. 97-104, 2011.

5. A. Kartal, Sır ve Sırlama Tekniği, Çizgi Matbaacılık, Banaz, 1998.