Effect of the incorporation of plastic waste on the mechanical properties of composite materials

Abstract

Through this scientific research, we have tried to study the effect of the incorporation of plastic waste on the mechanical properties of concrete, in order to obtain good concrete with high resistance at a lower cost. To carry out this work, we adopted the following steps: Knowledge of the properties of concrete, which contains plastic waste of High Density Polyethylene (HDPE). Thus, the natural aggregate was replaced by concrete formulated with plastic waste in partial substitution varying between 0%, 10% and 20%. In all the concrete mixtures, the components, water, cement, gravel 3/8 and 8/15 and sand 0/3, remained constant while the HDPE waste varied according to the substitution rate. Through this process, the mechanical properties of concrete in fresh and hardened states were determined. The analysis of the results of the study allowed us to know the incorporation of plastic waste and its effect on the behaviour of the manufactured concrete. The results showed that the density of concrete made from plastic waste is lighter than the reference concrete without waste (C0), which contains only natural aggregates, in a fresh state. In the case of hardening, the results showed a decrease in the compressive strength of composite concrete produced from plastic waste compared to (C0) the reference concrete. In the study's second part, a numerical model for precision and effectiveness is constructed using the finite element (FE) method. Furthermore, manufacturing experiments are scheduled to use computer simulations that account for labour, materials, tests, and time. The nonlinear stress-strain relationship for time-dependent concrete deformations and tension cracks presents a challenge for concrete modelling. ANSYS software is used to use three-dimensional nonlinear finite elements in order to determine this kind of complex mechanical behavior.