Fracture-Mechanical Properties of Mortar-to-Brick Interfaces-Reference-Cited by-同舟云学术

Fracture-Mechanical Properties of Mortar-to-Brick Interfaces

Published:2014-09 Issue:9 Volume:26 Page:04014060
ISSN:0899-1561
Container-title:Journal of Materials in Civil Engineering
language:en
Short-container-title:J. Mater. Civ. Eng.

Author:

Schneemayer A.¹,Schranz C.²,Kolbitsch A.³,Tschegg E. K.³

Affiliation:

1. Vienna Univ. of Technology, Institute of Building Construction and Technology, Karlsplatz 13/2064, 1040 Vienna, Austria.

2. Vienna Univ. of Technology, Institute of Building Construction and Technology, Karlsplatz 13/2064, 1040 Vienna, Austria (corresponding author).

3. Professor, Vienna Univ. of Technology, Institute of Building Construction and Technology, Karlsplatz 13/2064, 1040 Vienna, Austria.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29MT.1943-5533.0000955

Reference38 articles.

1. Austrian Standards Institute. (2009). “ÖNORM B 1996-1-1:2009-03-01—Bemessung und konstruktion von mauerwerksbauten—Nationale Festlegungen [Eurocode 6: Design of masonry structures—National specifications].” ÖNORM B 1996-1-1 Vienna Austria (in German).

2. Austrian Standards Institute. (2011a). “ÖNORM B 1998-1:2011-06-15— Auslegung von Bauwerken gegen Erdbeben—Teil 1: Grundlagen Erdbebeneinwirkungen und Regeln für Hochbauten—Nationale Festlegungen [Eurocode 8: Design of structures for earthquake resistance—Part 1: General rules seismic actions and rules for buildings—National specifications].” ÖNORM B 1998-1 Vienna Austria (in German).

3. Austrian Standards Institute. (2011b). “ÖNORM B 3592:2011-09-01—Bestimmung der Kerb-Spaltzugfestigkeit und der spezifischen Bruchenergie von Baustoffen Baustoffverbindungen und Verbundwerkstoffen [Determination of cut-through-tensile splitting strength and specific fracture energy of building materials combinations of building materials and composites—Wedge splitting method].” ÖNORM B 3592 Vienna Austria (in German).

4. Austrian Standards Institute. (2012). “ÖNORM B 3344:2012-10-15—Baustellengemischte Mauer- und Putzmörtel [Building site mixed masonry and rendering/plastering mortars].” ÖNORM B 3344 Vienna Austria (in German).

5. Backes H. P. (1985). “Zum Verhalten von Mauerwerk bei Zugbeanspruchung in richtung der Lagenfugen [About the behavior of masonry under tensile loading in direction of bed joints].” Ph.D. thesis RWTH Aachen Aachen Germany (in German).

Cited by 11 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Experimental study of bond behavior on sprayed and poured mortar–brick interface with latex bonding agent under conventional and humid environments;Journal of Building Engineering;2023-10

2. Probabilistic finite element analysis of failures in concrete dams with large asperities in the rock–concrete interface;Archives of Civil and Mechanical Engineering;2023-04-08

3. Explicit Dynamic Analysis by a Rigid Body-Spring Model of Impact Loads of Artillery on Middle Age Fortifications;Buildings;2021-12-03

4. Post-peak behavior of concrete dams based on nonlinear finite element analyses;Engineering Failure Analysis;2021-12

5. Fracture behavior of cancellous bone and cancellous bone-PMMA bone cement interface: An experimental study using an integrated methodology (wedge splitting test and Heaviside-based digital image correlation);Journal of the Mechanical Behavior of Biomedical Materials;2021-10