Effect of Test Temperature and Displacement Rate on Semicircular Bend Test-Reference-Cited by-同舟云学术

Effect of Test Temperature and Displacement Rate on Semicircular Bend Test

Published:2019-07 Issue:7 Volume:31 Page:04019104
ISSN:0899-1561
Container-title:Journal of Materials in Civil Engineering
language:en
Short-container-title:J. Mater. Civ. Eng.

Author:

Chen Xuan¹,Solaimanian Mansour²

Affiliation:

1. Graduate Research Assistant, Dept. of Civil and Environmental Engineering, Pennsylvania State Univ., Sackett Bldg., 212 E College Ave., University Park, PA 16802 (corresponding author).

2. Director and Research Professor, Northeast Center of Excellence for Pavement Technology, Larson Transportation Institute, Pennsylvania State Univ., 201 Transportation Research Bldg., University Park, PA 16802.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29MT.1943-5533.0002753

Reference15 articles.

1. The combined effect of loading frequency, temperature, and stress level on the fatigue life of asphalt paving mixtures using the IDT test configuration

2. Application of intermediate temperature semi-circular bending test results to design mixtures with improved load-associated cracking resistance

3. New specimen for fracture toughness determination for rock and other materials

4. Temperature considerations in asphalt-aggregate mixture analysis and design;Deacon J. A.;Transp. Res. Rec.,1994

5. Effective Temperature for Analysis of Permanent Deformation and Fatigue Distress on Asphalt Mixtures

Cited by 16 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Application of time-temperature superposition principle for cracking characterization of asphalt mixtures using semi-circular bend test;Construction and Building Materials;2024-09

2. Experimental Study of the Semicircular Bending Test for Estimating the Flexural Strength of Concrete Mixtures for Pavements;Revista Ingeniería de Construcción;2024-08

3. Assessment of asphalt binder content, temperature and loading rate in indirect tensile strength and resilient modulus tests of a hot-mix asphalt – Comparison with Marshall design method;Construction and Building Materials;2024-05

4. Evaluating the low-temperature performance of asphalt mixtures based on the contraction and relaxation properties;Construction and Building Materials;2024-01

5. Research of reflective crack in asphalt pavement using SCB specimen and XFEM: From laboratory test to numerical simulation;Construction and Building Materials;2023-11