Mechanical and Bond Properties of 18-mm- (0.7-in.-) Diameter Prestressing Strands-Reference-Cited by-同舟云学术

Mechanical and Bond Properties of 18-mm- (0.7-in.-) Diameter Prestressing Strands

Published:2012-06 Issue:6 Volume:24 Page:735-744
ISSN:0899-1561
Container-title:Journal of Materials in Civil Engineering
language:en
Short-container-title:J. Mater. Civ. Eng.

Author:

Morcous G.¹,Hatami A.²,Maguire M.³,Hanna K.⁴,Tadros M. K.⁵

Affiliation:

1. Associate Professor, Durham School of Architectural Engineering and Construction, Univ. of Nebraska-Lincoln, Omaha, NE (corresponding author).

2. Graduate Student, Durham School of Architectural Engineering and Construction, Univ. of Nebraska-Lincoln, Omaha, NE.

3. Graduate Student, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.

4. Postdoctoral Fellow, Civil Engineering Dept., Univ. of Nebraska-Lincoln, Omaha, NE.

5. Emeritus Professor, Civil Engineering Dept., Univ. of Nebraska-Lincoln, Omaha, NE.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29MT.1943-5533.0000424

Reference20 articles.

1. ASTM. (2005). “Standard test methods and definitions for mechanical testing of steel products.” A370 West Conshohocken PA.

2. ASTM. (2006). “Standard specification for steel strand uncoated seven-wire for prestressed concrete.”A416 West Conshohocken PA.

3. ASTM. (2007). “Standard test method for evaluating bond strength for 15.2 mm (0.6″) diameter prestressing steel strand grade 270 uncoated used in prestressed ground anchors.” A981 West Conshohocken PA.

4. ASTM. (2008). “Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens).” C109/C109M West Conshohocken PA.

5. ASTM. (2001). “Standard test method for flow of hydraulic cement mortar.” C1437 West Conshohocken PA.

Cited by 32 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Benchmarking the Bond of 19-Wire–28.6-mm-Diameter Prestressing Strands to Normal-Weight Concrete;Journal of Materials in Civil Engineering;2024-11

2. Experimental Research of Bond Strength of Lightweight Aggregate Concrete to 15.7 mm Non-Pretensioned Steel Strands;Materials;2024-09-03

3. A new analytical model for bond strength between corroded steel strand and concrete;Scientific Reports;2024-05-25

4. Bond behavior and anchorage length of 18-mm-diameter steel strands embedded in ultra-high-performance concrete: an experimental and analytical study;Structure and Infrastructure Engineering;2024-05-02

5. Bond Characterization of 17.8-mm (0.7-in.) Diameter Prestressing Strand;Journal of Bridge Engineering;2024-04