Probabilistic Assessment of Standard Penetration Test Hammer Energy Efficiency and Rod Length Corrections-Reference-Cited by-同舟云学术

Probabilistic Assessment of Standard Penetration Test Hammer Energy Efficiency and Rod Length Corrections

Published:2023-08 Issue:8 Volume:149 Page:
ISSN:1090-0241
Container-title:Journal of Geotechnical and Geoenvironmental Engineering
language:en
Short-container-title:J. Geotech. Geoenviron. Eng.

Author:

Cetin K. Onder¹^ORCID,Cevik M. Efekan²^ORCID,Al-Suhaily Ahmed³,Yunatci A. Anil⁴^ORCID

Affiliation:

1. Professor, Dept. of Civil Engineering, Middle East Technical Univ., Ankara 06800, Turkey (corresponding author). ORCID: .

2. Graduate Student, Dept. of Civil Engineering, Middle East Technical Univ., Ankara 06800, Turkey. ORCID:

3. Graduate Student, Dept. of Civil Engineering, Middle East Technical Univ., Ankara 06800, Turkey.

4. Geotechnical Engineer, GeoDestek Ltd. Corp., Middle East Technical Univ. Technopolis, Silver Block - K1-12, Ankara 06800, Turkey. ORCID:

Publisher

American Society of Civil Engineers (ASCE)

Subject

Geotechnical Engineering and Engineering Geology,General Environmental Science

Link

https://ascelibrary.org/doi/pdf/10.1061/JGGEFK.GTENG-11136

Reference28 articles.

1. Aggour S. M. and W. R. Radding. 2001. “Standard penetration test (SPT) correction.” Accessed September 30 2001. https://trid.trb.org/view/719067.

2. Akbas S. O. and F. H. Kulhawy. 2008. “Case history of SPT energy ratio for an automatic hammer in Northeastern U.S. Practice.” In Proc. 3rd Int. Conf. Site Characterization: Geotechnical & Geophysical Site Characterization edited by A.-B. Huang and P. W. Mayne 1241–1245. Abingdon UK: Routledge.

3. Batchelor, C., G. Goble, J. Berger, and R. Miner. 1995. Standard penetration test energy measurements on the seattle ASCE field testing program. Cleveland, OH, Canada: Goble Rausche Likins and Associates.

4. Biringen E. and J. Davie. 2008. “SPT automatic hammer efficiency revisited.” Accessed October 6 2022. https://scholarsmine.mst.edu/icchge/6icchge/session04/14/.

5. Canadian Geotechnical Society. 1992. Canadian foundation engineering manual. 3rd ed. Richmond, BC: Canadian Geotechnical Society.

Cited by 4 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Event-based regional model of liquefaction susceptibility in Amik, Gölbaşı and Kahramanmaraş Basins after the February 6, 2023 Earthquakes;Engineering Geology;2024-09

2. Liquefaction at two petrochemical facilities during the February 6, 2023, Kahramanmaras-Turkiye earthquake sequence;Engineering Geology;2024-06

3. Examination of the correlation between SPT and undrained shear strength: Case study of clay till in Alberta, Canada;Engineering Geology;2024-05

4. Liquefaction triggering and induced ground deformations at a metallurgical facility in Dörtyol-Hatay after the February 6 Kahramanmaraş earthquake sequence;Soil Dynamics and Earthquake Engineering;2024-03