Evaluation of Deflection Bowl Parameters in Low-Volume Roads-Reference-Cited by-同舟云学术

Evaluation of Deflection Bowl Parameters in Low-Volume Roads

Published:2023-12 Issue:4 Volume:149 Page:
ISSN:2573-5438
Container-title:Journal of Transportation Engineering, Part B: Pavements
language:en
Short-container-title:J. Transp. Eng., Part B: Pavements

Author:

Andrews Jithin Kurian¹,Radhakrishnan Vishnu²,Koshy Reebu Zachariah³

Affiliation:

1. Ph.D. Research Scholar, Dept. of Civil Engineering, APJ Abdul Kalam Technological Univ., Thiruvananthapuram, Kerala 695016, India (corresponding author).

2. Assistant Professor, Dept. of Civil Engineering, National Institute of Technology, Warangal, Telangana 506004, India.

3. Professor, Dept. of Civil Engineering, Saintgits College of Engineering, Kottayam, Kerala 686532, India.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Transportation,Civil and Structural Engineering

Link

https://ascelibrary.org/doi/pdf/10.1061/JPEODX.PVENG-1273

Reference14 articles.

1. Permeability characteristics of bituminous premix carpet and mix seal surfacing;Choudhary R.;J. Indian Road Congress,2016

2. Development of the pavement structural health index based on falling weight deflectometer testing;Elbagalati O.;Int. J. Pavement Eng.,2016

3. Horak E. and S. Emery. 2006. “Falling weight deflectometer bowl parameters as analysis tool for pavement structural evaluations.” In Proc. ARRB Conf. Port Melbourne VIC Australia: Australian Road Research Board.

4. Horak E. A. Hefer J. Maina and S. Emery. 2014. “Structural number determined with the falling weight deflectometer and used as benchmark methodology.” In Proc. IEEE Hong Kong. New York: IEEE.

5. Lacante, S. C., M. de Beer, and E. Horak. 1991. Comparison between Falling Weight Deflectometer (FWD) and Benkelman Beam deflection basin parameters and back-calculation of layer moduli. Pretoria, South Africa: Annual Transportation Convention.