Underdetermined Blind Identification of Structures by Using the Modified Cross-Correlation Method-Reference-Cited by-同舟云学术

Underdetermined Blind Identification of Structures by Using the Modified Cross-Correlation Method

Published:2012-04 Issue:4 Volume:138 Page:327-337
ISSN:0733-9399
Container-title:Journal of Engineering Mechanics
language:en
Short-container-title:J. Eng. Mech.

Author:

Hazra B.¹²²³⁴,Sadhu A.¹²²³⁴,Roffel A. J.¹²²³⁴,Paquet P. E.¹²²³⁴,Narasimhan S.¹²²³⁴

Affiliation:

1. Research Engineer, General Electric Jack Welch Research Center, Bangalore, India; formerly, Graduate Research Assistant, General Electric Jack Welch Research Center.

2. Graduate Research Assistant, Dept. of Civil and Environmental Engineering, Univ. of Waterloo, Waterloo, Ontario, Canada.

3. Structual Engineer, Arup, Suite 2400, 2 Bloor St. East, Toronto, Ontario, Canada M4W 1A8; formerly, Graduate Research Assistant, Arup.

4. Assistant Professor, Dept. of Civil and Environmental Engineering, 200 University Ave. W., Univ. of Waterloo, Waterloo, Ontario, Canada, N2L 3G1 (corresponding author).

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanical Engineering,Mechanics of Materials

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29EM.1943-7889.0000328

Reference26 articles.

1. Blind separation of vibration components: Principles and demonstrations

2. A blind source separation technique using second-order statistics

3. Modal identification of output-only systems using frequency domain decomposition

4. Ambient vibration studies for system identification of tall buildings

Cited by 43 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A wavelet-based dynamic mode decomposition for modeling mechanical systems from partial observations;Mechanical Systems and Signal Processing;2023-03

2. Enhancing Second-Order Blind Identification for Underdetermined Operational Modal Analysis Through Bandlimited Source Separation;2023

3. A novel Bayesian blind source separation approach for extracting non-stationary and discontinuous components from structural health monitoring data;Engineering Structures;2022-10

4. Output-only modal identification and structural damage detection using time–frequency and wavelet techniques for assessing and monitoring civil infrastructures;Sensor Technologies for Civil Infrastructures;2022

5. Tensor-based approach for underdetermined operational modal identification;Mechanical Systems and Signal Processing;2021-11