Determining Target Reliability Index of Structures Based on Cost Optimization and Acceptance Criteria for Fatality Risk-Reference-Cited by-同舟云学术

Determining Target Reliability Index of Structures Based on Cost Optimization and Acceptance Criteria for Fatality Risk

Published:2021-06 Issue:2 Volume:7 Page:04021013
ISSN:2376-7642
Container-title:ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
language:en
Short-container-title:ASCE-ASME J. Risk Uncertainty Eng. Syst., Part A: Civ. Eng.

Author:

Liu Liang¹,Yang David Y.²^ORCID,Frangopol Dan M.³

Affiliation:

1. Graduate Research Assistant, Dept. of Civil and Environmental Engineering, Advanced Technology for Large Structural Systems Engineering Research Center, Lehigh Univ., 117 ATLSS Dr., Bethlehem, PA 18015-4729.

2. Assistant Professor, Dept. of Civil and Environmental Engineering, Portland State Univ., 1930 SW 4th Ave., Portland, OR 97201. ORCID: .

3. Professor and the Fazlur R. Khan Endowed Chair of Structural Engineering and Architecture, Dept. of Civil and Environmental Engineering, Advanced Technology for Large Structural Systems Engineering Research Center, Lehigh Univ., 117 ATLSS Dr., Bethlehem, PA 18015-4729 (corresponding author).

Publisher

American Society of Civil Engineers (ASCE)

Subject

Safety, Risk, Reliability and Quality,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/AJRUA6.0001127

Reference77 articles.

1. Australian geoguides for slope management and maintenance;AGS (Australian Geomechanics Society);J. News Aust. Geomech. Soc.,2007

2. Limit States Design—A Probabilistic Study

3. Allen D. E. 1981. “Criteria for design safety factors and quality assurance expenditure.” In Proc. 3rd Int. Conf. on Structural Safety and Reliability 667–678. Amsterdam Netherlands: Elsevier.

Cited by 14 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Reducing target reliability index of concrete bridge beams through compression yielding;Engineering Structures;2024-10

2. Advancements in structural target reliability: A comprehensive examination of theories and practical applications (2013-2024);Structures;2024-08

3. The need for nonuniform risk acceptability across climate change scenarios;Risk Analysis;2024-03-14

4. Life safety in the Reliability-Based design and assessment of structures;Structural Safety;2024-02

5. Partial safety factor calibration using surrogate models: An application for running safety of ballasted high-speed railway bridges;Probabilistic Engineering Mechanics;2024-01